Absolute magnitude

In astronomy, absolute magnitude (also known as absolute visual magnitude when measured in the standard V phometric band) measures a celestial object's intrinsic brightness. To derive absolute magnitude from the observed apparent magnitude of a celestial object its value is corrected from distance to its observer. The absolute magnitude then equals the apparent magnitude an object would have if it were at a standard luminosity distance (10 parsecs, or 1 AU, depending on object type) away from the observer, in the absence of astronomical extinction. It allows the true brightnesses of objects to be compared without regard to distance. Bolometric magnitude is luminosity expressed in magnitude units; it takes into account energy radiated at all wavelengths, whether observed or not.

The absolute magnitude uses the same convention as the visual magnitude: a factor of 100.4) (≈2.512) ratio of brightness corresponds to a difference of 1.0 in magnitude. The Milky Way, for example, has an absolute magnitude of about −20.5. So a quasar at an absolute magnitude of −25.5 is 100 times brighter than our galaxy (because (100.4)(-20.5-(-25.5)) = (100.4)5 = 100). If this particular quasar and our galaxy could be seen side by side at the same distance, the quasar would be 5 magnitudes (or 100 times) brighter than our galaxy.

Contents

Stars and galaxies (M)

In stellar and galactic astronomy, the standard distance is 10 parsecs (about 32.616 light years, or 3 × 1014 kilometres). A star at 10 parsecs has a parallax of 0.1" (100 milli arc seconds). For galaxies (which are of course themselves much larger than 10 parsecs, and whose overall brightness cannot be directly observed from relatively short distances) the absolute magnitude is defined by reference to the apparent brightness of a point-like or star-like source of the same total luminosity as the galaxy, as it would appear if observed at the standard 10 parsecs distance.

In defining absolute magnitude one must specify the type of electromagnetic radiation being measured. When referring to total energy output, the proper term is bolometric magnitude. The bolometric magnitude can be computed from the visual magnitude plus a bolometric correction, M_{bol}=M_V+BC. This correction is needed because very hot stars radiate mostly ultraviolet radiation, while very cool stars radiate mostly infrared radiation (see Planck's law). The dimmer an object (at a distance of 10 parsecs) would appear, the higher its absolute magnitude. The lower an object's absolute magnitude, the higher its luminosity. A mathematical equation relates apparent magnitude to absolute magnitude, via parallax.

Many stars visible to the naked eye have a such a low absolute magnitude that they would appear bright enough to cast shadows if they were only 10 parsecs from the Earth: Rigel (−7.0), Deneb (−7.2), Naos (−6.0), and Betelgeuse (−5.6). For comparison, Sirius has an absolute magnitude of 1.4 which is greater than the Sun's absolute visual magnitude of 4.83 (it actually serves as a reference point). The Sun's absolute bolometric magnitude is 4.75.

Absolute magnitudes of stars generally range from −10 to +17. The absolute magnitudes of galaxies can be much lower (brighter). For example, the giant elliptical galaxy M87 has an absolute magnitude of −22 (ie as bright as about 60,000 stars of magnitude -10).

Computation

One can compute the absolute magnitude M\!\, of an object given its apparent magnitude m\!\, and luminosity distance D_L\!\,:

M = m - 5 ((\log_{10}{D_L}) - 1)\!\,

where D_L\!\, is the star's luminosity distance in parsecs, wherein 1 parsec is approximately 3.2616 light-years.

For nearby astronomical objects (such as stars in our galaxy) the luminosity distance DL is almost identical to the real distance to the object, because spacetime within our galaxy is almost Euclidean. For much more distant objects the Euclidean approximation is not valid, and General Relativity must be taken into account when calculating the luminosity distance of an object.

In the Euclidean approximation for nearby objects, the absolute magnitude M\!\, of a star can be calculated from its apparent magnitude and parallax:

M = m + 5 (\log_{10}{p} + 1)\!\,

where p is the star's parallax in arcseconds.

You can also compute the absolute magnitude M\!\, of an object given its apparent magnitude m\!\, and distance modulus \mu\!\,:

M = m - {\mu}\!\,

Examples

Rigel has a visual magnitude of m_V = 0.18 and distance about 773 light-years

M_V = 0.18 - 5 \cdot (\log_{10} \frac{773}{3.2616} - 1) = -6.7

Vega has a parallax of 0.129", and an apparent magnitude of +0.03

M_V = 0.03 + 5 \cdot (1 +\log_{10}{0.129}) = +0.6

Alpha Centauri A has a parallax of 0.742" and an apparent magnitude of −0.01

M_V = -0.01 + 5 \cdot (1 +\log_{10}{0.742}) = +4.3

The Black Eye Galaxy has a visual magnitude of mV=+9.36 and a distance modulus of 31.06.

M_V = 9.36 - 31.06 = -21.7

Apparent magnitude

Main article: Apparent magnitude

Given the absolute magnitude M\!\,, for objects within our galaxy you can also calculate the apparent magnitude m\!\, from any distance d\!\, (in parsecs):

m = M + 5 (\log_{10}{d} - 1)\!\,

For objects at very great distances (outside our galaxy) the luminosity distance DL must be used instead of d (in parsecs).

Given the absolute magnitude M\!\,, you can also compute apparent magnitude m\!\, from its parallax p\!\,:

m = M - 5 (\log_{10}p + 1)\!\,

Also calculating absolute magnitude M\!\, from distance modulus \mu\!\,:

m = M + {\mu}\!\,

Bolometric magnitude

Bolometric magnitude corresponds to luminosity, expressed in magnitude units; that is, after taking into account all electromagnetic wavelengths, including those unobserved due to instrumental pass-band, the Earth's atmospheric absorption, or extinction by interstellar dust. For stars, in the absence of extensive observations at many wavelengths, it usually must be computed assuming an effective temperature.

Solar System bodies (H)

For planets, comets and asteroids a different definition of absolute magnitude is used which is more meaningful for nonstellar objects.

In this case, the absolute magnitude is defined as the apparent magnitude that the object would have if it were one astronomical unit (au) from both the Sun and the observer and at a phase angle of zero degrees. This is physically impossible, as it requires the observer to be located at the centre of the Sun, but it is convenient for purposes of calculation.

To convert a stellar or galactic absolute magnitude into a planetary one, subtract 31.57.

Apparent magnitude

The absolute magnitude can be used to help calculate the apparent magnitude of a body under different conditions.

m = H + 2.5 \log_{10}{(\frac{d_{BS}^2 d_{BO}^2}{p(\chi) d_0^4})}\!\,

where

d_0\!\, is 1 au, \chi\!\, is the phase angle, the angle between the Sun-Body and Body-Observer lines; by the law of cosines, we have:

\cos{\chi} = \frac{ d_{BO}^2 + d_{BS}^2 - d_{OS}^2 } {2 d_{BO} d_{BS}}\!\,

p(\chi)\!\, is the phase integral (integration of reflected light; a number in the 0 to 1 range)

Example: (An ideal diffuse reflecting sphere) - A reasonable first approximation for planetary bodies

p(\chi) = \frac{2}{3} ( (1 - \frac{\chi}{\pi}) \cos{\chi} + (1/\pi) \sin{\chi} )\!\,

A full-phase diffuse sphere reflects ⅔ as much light as a diffuse disc of the same diameter
Distances:
d_{BO}\!\, is the distance between the observer and the body
d_{BS}\!\, is the distance between the Sun and the body
d_{OS}\!\, is the distance between the observer and the Sun

Example

Moon

H_{Moon}\!\, = +0.25
d_{OS}\!\, = d_{BS}\!\, = 1 au
d_{BO}\!\, = 384.5 Mm = 2.57 mau
How bright is the Moon from Earth?
Full Moon: \chi\!\, = 0, (p(\chi)\!\, ≈ 2/3)
m_{Moon} = 0.25 + 2.5 \log_{10}{(\frac{3}{2} 0.00257^2)} = -12.26\!\,
(Actual -12.7) A full Moon reflects 30% more light at full phase than a perfect diffuse reflector predicts.
Quarter Moon: \chi\!\, = 90°, p(\chi) \approx \frac{2}{3\pi}\!\, (if diffuse reflector)
m_{Moon} = 0.25 + 2.5 \log_{10}{(\frac{3\pi}{2} 0.00257^2)} = -11.02\!\,
(Actual approximately -11.0) The diffuse reflector formula does better for smaller phases.

Meteors

For a meteor, the standard distance for measurement of magnitudes is at an altitude of 100 km (62 mi) at the observer's zenith.[1][2]

See also

Notes

  1. ↑ "Absolute magnitude of meteors", Glossary, International Meteor Organization, http://www.imo.net/glossary#term66, retrieved 2008-07-16 
  2. ↑ "Absolute magnitude of Solar System bodies", Solar System Dynamics Glossary, NASA Jet Propulsion Laboratory, http://ssd.jpl.nasa.gov/?glossary&term=H, retrieved 2008-07-16 

External links

Star
Evolution

Formation · Pre-main sequence · Main sequence · Horizontal branch · Asymptotic giant branch · Dredge-up · Instability strip · Red clump · PG1159 star · Mira variable · Planetary nebula · Protoplanetary nebula · Luminous red nova  · Luminous blue variable · Wolf–Rayet star · Supernova impostor · Supernova · Hypernova · Hertzsprung–Russell diagram · Color-color diagram
Protostars

Molecular cloud (H II region) · Bok globule · Young stellar object · Herbig–Haro object · Hayashi track · Hayashi limit · Henyey track · Orion (T Tauri · FU Orionis) · Herbig Ae/Be
Luminosity class

Subdwarf · Dwarf (Blue · Red) · Subgiant · Giant (Blue · Red) · Bright giant · Supergiant (Blue · Red · Yellow) · Hypergiant (Yellow) · Blue straggler
Spectral classification

O · B · A  · F · G · K · Be · OB · Subdwarf B · Late-type · Peculiar (Am · Ap/Bp (Oscillating) · Barium · Carbon · CH · Extreme helium · Lambda Boötis · Mercury-manganese · S · (Technetium) · Shell · Lead
Remnants

White dwarf (Black dwarf · Helium planet) · Neutron star (Pulsar · Magnetar) · Stellar black hole · Compact star (Quark · Exotic) ·
Stellar core: EF Eridani B
Failed and
theoretical stars

Substellar object (Brown dwarf · Sub-brown dwarf · Planetar) · Boson star · Dark-matter star · Quasistar · Thorne–Żytkow object · Iron star
Nucleosynthesis

Alpha process · Triple-alpha process · Proton-proton chain · Helium flash · CNO cycle · Lithium burning · Carbon burning · Neon burning · Oxygen burning · Silicon burning · S-process · R-process · Fusor · Nova (Remnants)
Structure

Core · Convection zone (Microturbulence · Oscillations) · Radiation zone · Photosphere · Starspot · Chromosphere · Corona · Stellar wind (Bubble) · Asteroseismology · Eddington luminosity · Kelvin–Helmholtz mechanism
Properties

Designation · Dynamics · Effective temperature  · Kinematics · Magnetic field · Magnitude (Absolute) · Mass · Metallicity · Rotation · UBV color · Variability
Star systems

Binary (Contact · Common envelope) · Multiple · Accretion disc  · Planetary system · Earth's Solar System
Earth-centric
observation of

Pole star · Circumpolar star · Magnitude (Apparent · Photographic · Color) · Radial velocity · Proper motion · Parallax · Photometric standard stars
Lists

Star names · Most massive · Least massive · Largest · Brightest (Historical) · Most luminous · Nearest (Nearest bright) · Brown dwarfs · Planetary nebulae · Novae · Notable supernovae · Supernova remnants · Supernova candidates · Timeline of stellar astronomy
Related articles

Planet · Star cluster · Globular cluster · Galaxy · Supercluster · Helioseismology · Guest star · Constellation · Asterism · Gravity · Intergalactic star  · Infrared dark cloud
Star portal